The air that you breath in your home passes through the air ducts and comes back to your rooms and your lung. That’s why it is important to clean your air ducts every 2 to 3 years. Additionally, your furnace could be the main waster of your electricity if your air ducts are not cleaned regularly.
If you haven’t cleaned them professionally for more than 2 years, let Techno-Gas Heating clean your air ducts by most advanced technologies and powerful equipment. Our experienced technicians are fully qualified and ready to do the right job for you.
Duct Cleaning Process:
The way that Techno-Gas applies in order to clean air ducts is the most efficient and effective way. The process which is described below takes between 2 and 3 hours depending on your house size and the difficulty of the job.
- 1.The first thing we do is to create two eight-inch diameter access panels, one hole in the hot plenum and one hole in the cold plenum.
- 2.Then we connect the 5000 CFM HyperVac duct vacuum to the hot plenum that will create the negative air pressure through the entire home.
- 3.Then we go around to each vent and use our forward air skipper to force everything into the main duct lines.
- 4.From the main duct lines we use our reverse air skipper that will shoot all the down and pulls everything into the plenum, then into the Vacuum.
- 5.Once we have cleaned all the vents and main duct lines, we repeat the process for the cold air intakes.
- 6.After that, we will clean the inside of the furnace as well as the blower and the filter.
- 7.Of course when we are all finished, we will seal up all of our access panels using ten-inch tin plates with metallic tape and 8 screws.
And just for your information, if you ever have the system cleaned again, even if it’s not with our company, nine out of ten companies will use the same access panels.
